Can"t find Carbide Insert in your local store? Then This is Where You Want to Be
 |
 Vermont American 14033 Double Fluted Masonry Drill Bit Carbide Tipped 1 x 6  US $7.99
|
 Ace 21516 Masonry Drill Bit Carbide Tipped 1 x 6 US $6.99
|
 Milwaukee 48 20 7430 SDS Bit 1 4 by 2 by 4 NEW US $5.99
|
 Milwaukee 48 20 7441 SDS Bit 5 16 by 4 by 6 NEW US $6.99
|
 Milwaukee 48 20 7451 SDS Bit 3 8 by 4 by 6 NEW US $7.75
|
 Nut Driver 125 5 32 P5 Xcelite 6 3 4 OAL US $13.50
|
 Classical Stile and Rail Router Bit Set US $79.99
|
 3x 12 CARBIDE GRIT Hacksaw BLADE SAW Brick Concrete US $7.99
|
 Carbide tipped wood lathe turning tool hollowing boring gouge chisel scraper US $45.87
|
 DeWALT DCD980L2 20V MAX Li Ion Drill Driver Kit US $279.00
|
 Ten Solid Carbide Drill Bits 58 042 105mm Sharp US $10.88
|
 BRAND NEW 300 PIECE DRILL BIT AND WALL ANCHOR SET US $15.50
|
 DEWALT D51321 3 4 to 1 3 4 COIL ROOFING NAILER NAIL GUN GREAT CONDITION US $93.00
|
 Bostitch Coil Roofing Nailer RN46 US $139.99
|
 FREUD 04 136 TWO FLUTE STRAIGHT ROUTER BIT 5 8 US $15.99
|
 Vermont American 22112 Router Bit HSS Hinge Mortising 1 2 US $4.09
|
 Vermont American 22070 Router Bit HSS 1 4 Veining US $3.99
|
 Vermont American 22019 Router Bit HSS 3 8 Straight US $3.99
|
 Vermont American Router Bit HSS 3 8 Straight 22019 US $3.99
|
 Tenryu PT 18524 P 7 1 4 Saw Blade 24T US $6.99
|
 Irwin 14130 Marathon Decking Circular Saw Blade US $9.99
|
Is it ok that I get a bunch of sparks while turning down 5250 carbon steel w/ a carbide cutter on a lathe?
Ok I am taking off about .080-.090" each pass and I am running at 1250 RPM and turning down 5150 carbon steel that was heat treated with a carbide insert cutter.
Sorry for the typo I am turning down 5150 carbon steel that was heat treated
I agree the RPM and amount of each pass are very high but I am getting an awesome finish.
I am turning down 1.25" bar down to .875" through .500" diameters
No I am cutting dry. I started out using coolant but seeing how most of it got spun off the work I started running dry. It still made sparks either way.
no too fast cut rpms to 800,
.010 cut
How Tungsten Carbide Inserts are made