Can"t find Gouge Hss in your local store? Then This is Where You Want to Be
 |
 NEW PSI LCSIXW 6 pc WOOD STEEL LATHE TURNING SET $80  US $13.26
|
 8pc HSS WOOD LATHE CHISEL SET New with WOOD CASE US $69.99
|
 Wood Lathe Turning 2 Roughing Gouge HSS US $39.95
|
 Tormek Bench Grinder Mounting Set BGM 100 New in Box US $63.00
|
 4 PC HSS Wood Lathe Lathe Bowl Turning Tools Set US $72.95
|
 Wood Lathe Turning 5 8 Bowl Gouge HSS US $26.49
|
 Woodturning 6 Piece HSS Mid Sized Boxed Turning Chisels US $56.95
|
 Wood Lathe Turning 1 4 Spindle Gouge HSS US $9.49
|
 Benjamins Best 1 HSS Wood Lathe Versa Chisel US $19.49
|
 Wood Turning Lathe 5 8 Bowl Gouge HSS 22 Length US $23.50
|
 PSI Woodworking LCSIXW Hi Speed Steel Wood Lathe Chisel US $88.98
|
 8 PC HSS Wood Lathe Lathe Turning Tools NEW US $64.95
|
 Wood Lathe Turning 1 2 Spindle Gouge HSS US $15.95
|
 Wood Lathe Turning 3 8 Spindle Gouge HSS US $11.49
|
 5 PC HSS Wood Lathe Turning Tool Set US $29.49
|
 Wood Lathe Turning 3 8 Bowl Gouge US $16.29
|
 Wood Lathe Turning 3 4 Roughing Gouge HSS US $17.95
|
 Woodturning Lathe 1 Spindle Gouge length 18 M2 HSS US $17.95
|
 H1064 6 Piece Deluxe HSS Lathe Chisel Set NEW US $99.95
|
 Wood Lathe Turning 1 Spindle Gouge HSS US $17.49
|
 Woodcraft wood turning 1 spindle gouge HSS US $25.00
|
 Robert Sorby wood turning 1 4 spindle gouge HSS US $15.00
|
 Wood Lathe Turning 1 2 Bowl Gouge HSS US $19.29
|
 PSI Woodworking LCAN6S 6 Piece HSS Standard Chisel Anniversary Lathe Chisel Set US $87.78
|
Sanding cheep looking Floorboards?
OK I have a belt sander and a detail sander and have the whole upstairs to do two large bedrooms and staircase and landing the floor boards a messed up splits knocks and gouges etc i have the time and elbow grease just looking for best tips on sorting out the damaged boards sanding and finishing. as its fairly cheep to hire a drum sander from HSS its the deposit to put down i dont have handy so im making use of the tools i have
thanks in advance
an enthusiastic DIY-er
thanks guys - Tony B im quite happy about replacing some really bad boards i come across got a timber merchants 5 Min's away they charge £5.50 for 15 ft not bad i thought but thanks was worried about hand belt sanding thought it would have been too bigger job but im happy to crack on now greased elbows at the ready!!
im a builder ..from your description the floors have been taken up a few times ..rewiring ..central heating etc ..when they do that the tongue is cut off to get the boards out ..so it looks a right mess ..the truth is there is no dodge you can do to make them look better cheaply ..and the rooms will feel colder and a lot more noisy without carpets ..have never seen a customer that has stuck with bare floorboards for long time