If You Have Found it Hard To Find Metal Lathe Bit , This is The Place For You!
 |
 Hard Alloy 42mm Dia Hole Saw Twist Drill Bit Hex Wrench  US $10.28
|
 Alloy Drilling 17mm Hole Saws w Twist Bit Set Tool US $7.34
|
 Electric Drilling Tool 50mm Dia Hole Saw with Twist Bit US $15.92
|
 Triangle Shaft 40mm Dia Hole Saw w Twist Drill Bit Kit US $10.34
|
 3 in 1 Drilling Tool 70mm Dia Hard Alloy Teeth Hole Saw US $22.24
|
 17mm Diameter Hole Saw Twist Drill Bit Hex Wrench Kits US $7.56
|
 42mm Diameter Alloy Cutting Hole Saw Drilling Tool Kits US $10.28
|
 75mm Dia Hole Saw 6mm Twist Drill Bit w Hex Wrench Set US $24.54
|
 60mm Hole Saw 6mm Twist Drill Bit L Shape Hex Wrench US $19.89
|
 Electric Drill 19mm Dia Hole Saw Kit for Alloy Cutting US $7.55
|
 Alloy Drilling Tool 19mm Dia Hole Saw Twist Bits Set US $7.38
|
 Steel Cutter 35mm Hole Saw w Twist Drill Bit Hex Wrench US $11.67
|
 Alloy Cutting 17mm Hole Saw Twist Drill Bit Hex Wrench US $6.20
|
 Steel Drilling Tool 75mm Dia Hole Saw w Twist Bit Kit US $24.56
|
 Alloy Drilling 42mm Hole Saw w Twist Bit L shape Wrench US $10.57
|
 19mm Alloy Board Cutting Hole Saw Drill Bit Wrench Kits US $7.57
|
 Alloy Board Cutting 15mm Hole Saw Bits w Hex Wrench Kit US $7.03
|
 Hard Alloy 65mm Dia Cup Type Hole Saw Drilling Tool Set US $19.19
|
 38mm Dia Hole Saw Alloy Drilling Tool w Twist Drill Bit US $12.47
|
 55mm Dia Hole Saw 6mm Twist Drill Bit Hex Wrench Kit US $13.68
|
 45mm Dia Hole Saw Twist Drill Bit for Alloy Drilling US $11.92
|
 Metal Drilling 70mm Dia Hole Saw w Twist Bit Wrench Kit US $21.22
|
 3 in 1 Steel Drilling 65mm Dia Hole Saw Bit Cutter Kit US $19.79
|
 3 in 1 Metal Drilling 60mm Dia Hole Saw Cutter Tool Kit US $15.74
|
 70mm Dia Hole Saw w Twist Drill Bit L shape Hex Wrench US $21.24
|
 15mm Dia Alloy Drilling Tool Hole Saw w Twist Bits Set US $9.87
|
 Hard Alloy 50mm Dia Hole Saw Twist Drill Bit Hex Wrench US $15.90
|
 24 WIRE BRUSH WHEEL CUP Clean Brass S Steel fits Dremel US $13.99
|
 6 pc 3 8 ALLEN WRENCH METRIC LONG BALL HEAD HEX SOCKET US $18.99
|
 53mm Hole Saw w Twist Drill Bit Hex Wrench for Drilling US $13.70
|
 Hard Alloy Teeth 75mm Dia Hole Saw Cutter for Drilling US $25.91
|
 Hard Alloy 48mm Hole Saw w Twist Drill Bit Hex Wrench US $13.73
|
 60mm Dia Hole Saw w Twist Drill Bit for Steel Drilling US $15.74
|
 Irwin 1 2 x 18 2 Long Installer Bit US $13.03
|
 65mm Hole Saw 6mm Twist Drill Bit Metal Drilling Tool US $19.19
|
 Alloy 53mm Dia Hole Saw 6mm w Twist Bit Hex Wrench Set US $13.68
|
 Metal Removal 4MM Solid Carbide Drill Bit 225 0401 00 US $8.99
|
 Lot of 10 metal lathe regular carbide tool bits cutters US $35.00
|
 Lot of 6 metal lathe carbide regular tool bit cutters US $30.00
|
if you own a lathe you can answer this?
Ok long story as short as i can make it. i have a 3/8" iron rod cut into 1" lengths and i have to drill a 8mm hole in it dead center the whole way through them. ""it's for tattoo machine coil cores cause i know your wondering" I have a drillpress but cant eye them up plus i have to make many of them everyone in the trade says they use a lathe to do this. i found a few ones a 12" craftsman but they all say wood lathes is there a difference in a metal lathe and a wood one? or are they using a wood one to do it. with a chuck on one end with the 8mm Drill Bit in it and the 3/8 rod in the other i'm totally guessing here cause i have no idea i'm hoping for some info on lathes that will help. Thanks
I would not think you could be very accurate with trying to bore holes with a Wood Lathe, or drill press, even with a vice bolted down,, Find someone with a metal lathe, or milling machine, if the parts were the right diameter you could bore holes pretty well on a mill, and if set up right pretty good on a lathe, depending on how long the parts are you have to make sure it does not wobble around at all when you try to bore on the lathe, I have pieces on my lathe that bolts to the bed way and has 3 special "fingers" that I adjust out to keep the center of work in place or the end when trying to bore, a good vice on a mill will hold things pretty good, much better than the average one on a drill press...
Big difference between wood and metal working machines. I have an atlas 12x48 metal lathe, and a 4 thousand pound Cincinnati mill that I use a lot to make parts for old farm equipment..
Good luck with the project..