Find The Latest Surface Pen Information You"re Looking For Below
 |
 EXOTIC SNAKEWOOD 12 x 3 x 1 EXOTIC WOOD LUMBER 8543  US $75.00
|
 Sapele Exotic Hardwood Panel Cuts 2088 US $77.00
|
 181 CORIAN like Cigar pen blank Seller picks color US $18.00
|
 RESIN PMMA BLANK SWIRL COLLECTION 5 RODS ONE COLOR EACH US $66.00
|
 100 Corian Solid Surface pen blanks 50 COLOR SETS US $9.00
|
 SCALLOP SEASHELL CNS polymer clay mold US $3.00
|
Scroll Down Now to Find Even More Surface Pen Info
|
|
EXOTIC SNAKEWOOD 12 x 3 x 1 EXOTIC WOOD LUMBER 8543 US $75.00
|
Sapele Exotic Hardwood Panel Cuts 2088 US $77.00
|
181 CORIAN like Cigar pen blank Seller picks color US $18.00
|
|
RESIN PMMA BLANK SWIRL COLLECTION 5 RODS ONE COLOR EACH US $66.00
|
100 Corian Solid Surface pen blanks 50 COLOR SETS US $9.00
|
SCALLOP SEASHELL CNS polymer clay mold US $3.00
|
 Skull Sugar Skull Day of the Dead face CNS polymer clay mold US $2.75
|
 Heart and Wings CNS polymer clay mold US $3.00
|
 Gingko Leaf CNS polymer clay mold US $3.50
|
How do you remove a layer of paint from a painted metal surface?
I need to remove some silver paint, from a paint marker pen, that was applied to a painted blue telescope tube
without damaging the underlying layer
You might try different solvents. Such as carb cleaner or lacquer thinner. I'd try on a part you won't see when the telescope is fully assembled. If all else fails use a wet sand paper and re paint. The factory finish is usually a baked on type that lends itself well to cleaners. You might also think of using a green scrubby. Although this might dull the finish. You might then wish to recaot with a gloss or satin clear designed for metal. Good luck in your endeavor.